Hot water loss diagnosis
If your hot water supply is on the blink then there are a few simple checks that you can perform to help get your bathing needs back on track:
Check the power supply
Check the pump
Have a quick check to make sure that your pump is running by feeling the side of the pump for motion. If it doesn't appear to be running, you will need to get a heating engineer in to investigate.
Check the thermostat
Check that your thermostat is switched on and not set too low.
You should also check that the power switch is turned to ‘On' and that the thermostat controlling the water temperature is set high enough.
Check the pilot light
If none of these checks solve the problem then it's time to call in a Gas Safe Registered heating engineer - which is us!!!